Current rotary Disc type dyeing sample machine motion method is to put the dyeing beaker on the rotary Disc.In fact, it is using gravitation influence to change beginning or end position of dyeing beaker movement constantly and to guide then dye liquid flo-ws inside the dyeing beaker. The movement connot be too fast otherwise dye liquid subjected to the centrifugal force will not flow. The reason is the centrifugal force caused by the movement will neutralize the gravitation. If the movement is too slow, the solution inside the dyeing beaker will not flow sufficient and will affect the uniform of the dyeing. It only even the movement is moderate provides normal dye liquid flowing speed.
Motion principle of HANG JIE turn over jump dyeing sample machine is very simple.Roll a round trip for the dyeing beaker and to make the reverse of dyeing beaker beginning and end.Under adequate using of gravitation,dye liquid will have maximum flow-ing. So the uniform dyeing is available when dyeing thicker fabric or under small liquid ratio condition. But heating method is the key point of whole technology. Formerly,foreign company as produced infrared rays dyeing small samle machine with similar dyeing beaker motion method. But with fixed dyeing beaker position, each deying beaker distance is different to the infrared rays and therefore heating is not uniform. HANG JIE XING YE CO.,LTD moved the independent temperature control technology of HJ-18L magnetic-levitated vortex dyeing machine to turn over jump dyeing sample machine and solve the technology bottleneck that forelgn company can not overcom.

目前所用轉盤式的染色小樣機,將染杯放在轉盤上轉動的方式,事實上是利用重力作用,在染杯轉動時頭尾不斷對換高低位置時,引導染液在染杯來回流動。但因為轉動時產生的離心力會抵消引力的原故,所以轉動速度不能太快,否則染液受離心力作用而被摔在染杯一端,不能流動。太慢則染杯內的溶液也流動不夠,影響染色的均勻性。就是轉速適中,也僅能提供一般的染液流動速度而已。
航傑-翻躍式染色小樣機,其運動原理,事實上非常簡單,就是將染杯直接頭尾倒置的來回翻滾,染液在充分利用引力下得到最大的流動,所以在染較厚的織物及小液比的情況下,都可以得到均勻的染色。但是,加熱方式才是整個技術的重心。以往,國外也曾經有廠家製做過類似染杯運動方式的紅外線染色小樣機,但是固定式的染杯位置,導致各染杯離紅外線發熱線的距離不同,加熱不能均勻。
航傑興業股份有限公司利用已成功生產的HJ-18L磁浮式游渦試色機的獨立溫控技術,挪移至航傑-翻式染色小樣機的應用,解決了國外公司也無法克服的技術瓶頸。

溫度範圍 20°C-150°C
升溫速度 5°C/min
加熱方式 固態金屬導熱系統
染杯位置 12個位置
染杯容積 300 c.c.
液比 1:3
加藥

手動(標準型)
自動(選購)

控制器 微電腦溫度控制器。可分開單獨溫控,或分成3組同時控制染杯、可分開或同時操作,可不同液比。
總耗電量 2.6KW 單相220V 60HZ
功能 上、下翻躍式120° 0-32/min RPM
尺寸 1068*684*688(mm)
TYPE HJ-M12

Temperature range 20°C-150°C
Temperature rising speed 720*780*900(mm)
Heating method solid-state metal heat conduction system
Dyeing beaker position twelve positions
Dyeing beaker volume 300c.c
Liquid ration 1:3
Dosing manual(standard)
auto(selection)
Controller Microcomputer temperature controller control temperature individually and separately,Divide into three groups to con-trol dyeing beaker and using different liquid ratio to operate at the same time or separately.
Total power consumption 2.6KW Single phase 220V 60HZ
Function up & down turn over jump type 120° 0-32/min RPM
Dimension 106/*684*688(mm)
首頁 >> 產品介紹>>翻躍式染色小樣機

航傑興業股份有限公司 HANG JIE XING YE CO., LTD. TEL:886-3-3706566 FAX:886-3-3706599
版權所有©2006 航傑興業股份有限公司